QUICK-TWIST flange spigot end (fitting and removal piece)

PE100 QUICK-TWIST fitting and removal piece

The light­weight and absolutely corrosion-resistant QUICK-TWIST fitting and disman­tling piece is tailored precisely to your needs.
On the fixed side, QUICK-TWIST is equipped with our tried-and-tested VP special flange, which offers outstanding connection and sealing properties.
For maximum relia­bility on the loose side, the cleverly designed Reinert-Ritz HP flange is used.
This impresses with its patented and coordi­nated design of backing flange and PE collar.
For the pipe-side connection, you can choose between a spigot end (for HM or HS welding) or a special VP flange.
The variant with spigot end (for HM or HS welding) is a novelty in the fitting and extension piece market and is unique in this form.
It allows you to integrate the fitting and extension option perma­nently welded into the pipe, which saves a consid­erable amount of time during installation.
On the loose side, our Reinert-Ritz HP flange, known for its high relia­bility, is used.
Operation is virtually a breeze.
A turning mechanism adjusts the desired length.
The flange is then screwed on as usual.
The time saving compared to a standard fitting and removal piece is more than 50 %.
Technical speci­fi­ca­tions HP flange 

  • Loose flange, fully pressure-resistant
  • Made from high-strength plastic

Seal depending on appli­cation: EPDM or NBR Standards 

  • Flange drilled according to DIN EN 1092–1
  • Spigot end: DIN EN 12201–3
  • O‑ring: DIN EN 681–1

DVGW certifi­cates for PE fittings: 

  • DV-8606BT0423 (ø 75 mm — ø 225 mm)
  • DV-8611BT0424 (ø 250 mm — ø 630 mm)

Have we piqued your interest? Read on at Quick-Twist.de and find out more or contact our sales team directly!

Technical data

Technische Zeichnung

Complete data sheet

Tender text

General prelim­inary remark The fittings to be offered must be made of material in accor­dance with the PE100+ Associ­ation and comply with DIN EN 12201 with regard to dimen­sions, toler­ances and quality requirements.
The fittings must be designed both in the flange-flange version and in the optionally available flange-tip-end version with coarse thread with patented thread play for the adjustment possi­bility +/- 15 mm of the fitting and removal piece.
The PE fitting bodies must be manufac­tured from a single piece of homoge­neous semi-finished product, alter­na­tively by injection molding.
Semi-finished products made from coiled rod are not permitted.
The flanges must be drilled in accor­dance with DIN EN 1092–1 PN 10 or PN 16.
The collar and flange must interlock positively at their connecting surfaces and the flange must also support the collar from the outside to counteract deformation.
This ensures that the flange connection can withstand the full pressure load in accor­dance with the pipe dimensioning.
The backing flange on the fixed flange side must be equipped with a disk spring function that maintains the preload after the bolts have been tightened.
The collar on the fixed flange side and the thread seal must be fitted with an O‑ring seal appro­priate to the dimension and appli­cation (TW è EPDM | AW è NBR).
The backing flanges must be made of corrosion-free, fiber-reinforced, high-strength plastic or steel with a plastic coating in accor­dance with DIN EN 10310 or stainless steel.

  • Weiter­lesen

    Der Nachweis der Herstellung auf Basis eines Qualitätssicherungssystems nach DIN EN ISO 9001 ist zu erbringen. Für alle Formteile ist ein Zeugnis nach DIN EN 10204 vom Hersteller vorzulegen.

    Das anstelle des Festflan­sches optional erhältliche Spitzende ist in langer Form auszuführen, um sowohl eine Heizele­ments­tumpf­schweißung (HS) als auch eine Heizwen­delschweißung (HM) ausführen zu können.

    Optional erhältliche Ausführungen:

    • Spitzende zum Einschweißen anstelle der Festflanschseite
    • Mit längerem Verstellweg
    • Mit größerer Baulänge
    • Unter­schiedliche Flansch­abmes­sungen je Seite

    Normen/Richtlinien

    DIN EN 12201, DIN EN 1092–1, DIN EN 681–1, DVS 2207, DVS 2210, DIN EN 10204, DIN EN ISO 9001, DIN EN ISO 50001, DVGW W 400–2, DVGW GW 335

    Zulassungen/Zertifikate

    DVGW: Flansch­seiten DV-8606BT0423 und DV-8611BT0424
    Abnah­meprüfzeugnis 3.1 nach DIN EN ISO 10204 am Halbzeug vom verar­beiteten Rohstoff mit Angabe von MFR und OIT; nur PE 100 Material gem. PE100+ Association
    Hersteller zerti­fiziert nach ISO 9001:2015 und ISO 50001:2011

    Hersteller:
    Reinert-Ritz GmbH oder gleichwertig

    Leistungs­beschreibung:

    PE 100 Pass- und Ausbaustück QUICK-TWIST PAS-FS Flansch-Spitzende-Version mit einer Losflan­sch­seite mit Hinter­legflansch aus korro­sions­freiem, faserver­stärktem, hochfestem Kunst­stoff [alter­nativ aus Stahl mit Kunst­stoff­beschichtung nach DIN EN 10310 bzw. Edelstahl], und einer Spitzend­seite der Rohrdi­mension entsprechend, ausgelegt für volle Druck­be­last­barkeit, gebohrt nach DIN EN 1092–1,

    DN …
    PN …
    DN/OD …
    SDR …

    Liefer­nachweis:
    Reinert-Ritz GmbH
    Ernst-Heinkel-Straße 2
    48531 Nordhorn
    Tel.: +49 5921 8347–0
    Fax: +49 5921 8347–25
    www.reinert-ritz.de
    Email: contact@reinert-ritz.com

Word template

Downloads

QUICK-TWIST FS data sheet

QUICK-TWIST product brochure

RR product catalog