Elbow 45°

45° elbow made from tube and semi-finished product

The basic body of the elbows is made of homoge­neous hollow bar with optimized flow, has a very space-saving design and is extended with pipe, so that processing with electro­fusion sockets and heating element butt welding is also possible here.
Thanks to its compact dimen­sions, changes of direction are possible in the smallest of spaces. Mechanical production ensures that the angle is maintained precisely and perma­nently, which makes instal­lation easier and minimizes effort. Other angles on request.

Technical data

Produktbild nahtloser PE Bogen bis 45° gedrückt

Complete data sheet

Tender text

PE100 elbows­Generalprelim­inary remark The fittings to be offered must be made of material in accor­dance with the PE100+ Associ­ation and comply with DIN EN 12201 with regard to dimen­sions, toler­ances and quality require­ments. Proof of production on the basis of a quality assurance system in accor­dance with DIN EN ISO 9001 must be provided. A certificate in accor­dance with DIN EN 10204 must be provided by the manufac­turer for all molded parts. The body of the molded part must be manufac­tured from a single piece of homoge­neous semi-finished material using a milling process in order to ensure the required reinforcement and thus high stability of the molded part. Semi-finished products made from winding rod or other subse­quently applied reinforce­ments are not permitted. The body of the fitting and the pipe sections for the spigot ends must be made of PE100. The pipe connec­tions must be designed as spigot ends in a suffi­ciently long form for HE butt welding or HW welding corre­sponding to the nominal width of the pipe. The inner beads of the HE butt weld joint must be removed.

  • Weiter­lesen

    Normen/Richtlinien
    DIN EN 12201, DVS 2207, DVS 2210, DIN EN 10204, DIN EN ISO 9001, DIN EN ISO 50001

    Zulassungen/Zertifikate

    Abnah­meprüfzeugnis 3.1 nach DIN EN ISO 10204 am Halbzeug vom verar­beiteten Rohstoff mit Angabe von MFR und OIT; nur PE100 Material gem. PE100+ Association

    Hersteller zerti­fiziert nach ISO 9001:2015 und ISO 50001:2011

    Hersteller:
    Reinert-Ritz GmbH oder gleichwertig

    Leistungs­beschreibung:
    PE100 Winkel …° für … [Medium]-Leitung, druck­klas­sen­gerecht, mit langen Schweißenden für Einbau in eine Leitung der Dimension DN/OD … SDR … Nenndruck­stufe PN …

    Liefer­nachweis:
    Reinert-Ritz GmbH
    Ernst-Heinkel-Straße 2
    48531 Nordhorn
    Tel.: +49 5921 8347–0
    Fax: +49 5921 8347–25
    www.reinert-ritz.de
    Email: contact@reinert-ritz.com

Word templatePDF template

Downloads

Angle data sheet

RR product catalog

Molded parts in practice