T‑pieces

Pressure class-compliant solutions for outlets at 90°

Reinert-Ritz T‑pieces are charac­terized not only by their full pressure load capacity but also by a wide range of variants and flexi­bility in design. This means that even uncon­ven­tional pairings of passage and exit can be realized. In addition to the classic weld-in version, the outlets can also be supplied with HP flanges, special flanges and VP flanges. Prefab­ri­cated molded parts of this kind reduce both the space required and the instal­lation effort, which lowers your project costs in the long term.

Technical data

Technische Zeichnung T-Stück kurz 36cm

Complete data sheet

Tender text

PE100 T‑piece on all sides with flange connec­tions of the same nominal diameter

General prelim­inary remarks

The molded parts to be offered must be made of material in accor­dance with the PE100+ Associ­ation and comply with DIN EN 12201 with regard to dimen­sions, toler­ances and quality require­ments. Proof of production on the basis of a quality assurance system in accor­dance with DIN EN ISO 9001 must be provided. A certificate in accor­dance with DIN EN 10204 must be provided by the manufac­turer for all molded parts. Alter­na­tively, the body of the molded part must be manufac­tured from a single piece of homoge­neous semi-finished material using the injection molding process, even for more complex struc­tures, in order to ensure the required reinforcement and thus high stability of the molded part. Semi-finished products made from winding rod or other subse­quently applied reinforce­ments are not permitted.

PE100 special flanges with EPDM O‑ring must be welded on all sides using the HE butt welding process; the inner bead must be removed.

The flange connec­tions must have the same nominal diameter and the hole pattern must be designed in accor­dance with DIN EN 1092–1 PN 10 or PN 16.

The backing flange must be made of plastic-coated steel.

Optionally available versions: Design according to DIN EN 1092–1 PN 25, stainless steel backing flange, galva­nized backing flange, flat sealing without groove and O‑ring or with slotted holes in the PE collar for perfect alignment of the fittings to be connected.

  • Weiter­lesen

    Normen/Richtlinien
    DIN EN 12201, DIN EN 1092–1, DVS 2207, DVS 2210, DIN EN 10204, DIN EN ISO 9001, DIN EN ISO 50001, DVGW W 400–2, DVGW GW 335

    Zulassungen/Zertifikate

    Abnah­meprüfzeugnis 3.1 nach DIN EN ISO 10204 am Halbzeug vom verar­beiteten Rohstoff mit Angabe von MFR und OIT; nur PE100 Material gem. PE100+ Association

    Hersteller zerti­fiziert nach ISO 9001:2015 und ISO 50001:2011

    Hersteller:
    Reinert-Ritz GmbH oder gleichwertig

    Leistungs­beschreibung:
    PE100 T‑Stück, druck­klas­sen­gerecht, allseitig mit angeschweißten, nennweit­en­gle­ichen Sonder­flan­schen versehen, gebohrt nach DIN EN 1092–1,

    Durchgang d1: DN … d … SDR … PN …
    Durchgang d3: DN … d … SDR … PN …
    Abgang d2: DN … d … SDR … PN …

    Liefer­nachweis:
    Reinert-Ritz GmbH
    Ernst-Heinkel-Straße 2
    48531 Nordhorn
    Tel.: +49 5921 8347–0
    Fax: +49 5921 8347–25
    www.reinert-ritz.de
    Email: contact@reinert-ritz.com

Downloads

T‑piece data sheet

RR product catalog

Molded parts in practice